Water

Water tariff calculator

Turn block rates into real bills, and see what your tariff has to recover.

Runs in your browser. No signup. Updated 5 November 2026.

Use a normal month. Collection rate is what you actually collect, not what you bill. The starting blocks are an example; replace them with your published tariff.

Leave the last "Up to" blank so that block covers everything above it. A row with a limit but no rate is charged at zero.

KES 0.00for 15 m³

Usage
-
Standing
-
Levies
-
Required average
-
Tariff average
-

-

BlockUnitsRateAmount
ConsumptionUsageStandingLeviesTotal

A tariff is two things at once: a price list and a promise that the scheme covers its costs. This calculator builds the first and checks the second.

Set your blocks, standing charge, minimum charge and levies. Then compare the average rate you need with the average your blocks actually earn at the amounts your customers use.

Before you rely on the number. A planning tool, not an approval. Confirm your tariff and the required review with WASREB, your county water department or the regulator responsible for your area.

Reference: WASREB. Rates and rules change; check the current position before acting.

The method

How to calculate a block water tariff bill

A block tariff charges each cubic metre at the rate of the block it falls in, so the first units cost less than the last. Add up the blocks, add the standing charge, then add any levy. A minimum charge only applies when the bill would otherwise fall below it.

To check that a tariff covers the scheme, work out the average rate it has to earn: monthly costs divided by billed volume, then divided again by the share of bills you collect. If the blocks earn less than that at typical usage, the scheme runs short even when every bill is correct.

Worked example: a 15 m³ water bill

Six cubic metres at KES 95, then KES 120 above that, with a KES 150 standing charge and a 1.5% levy on usage.

First 6 m³ at KES 95KES 570.00
Next 9 m³ at KES 120KES 1,080.00
Standing chargeKES 150.00
Levy at 1.5% of usageKES 24.75
Total billKES 1,824.75

A scheme costing KES 450,000 a month, billing 9,000 m³ and collecting 85% has to earn KES 58.82 per m³ on average.

How it works

How to use the water tariff calculator

Set the blocks

Each block is a rate per cubic metre up to a limit. The last block has no limit. The calculator charges each cubic metre once, at the rate of the block it falls in.

Recover the cost

Divide your monthly cost by the water you actually bill, then by the share of bills you collect. That is the average rate the tariff has to earn.

Check the sample bills

A tariff can recover the right total and still be wrong for a household using five cubic metres. Read the small and large sample bills before publishing.

Questions we get

Questions about the water tariff calculator

Does the calculator include VAT?

No. It produces the tariff charge before VAT, because a water scheme may or may not be VAT-registered. Add VAT separately if it applies to you.

What is a standing charge for?

It covers the cost of having a connection at all: meter maintenance, billing, core staff and a reserve fund. It is charged whether the customer uses water that month or not.

Can I use this for a WASREB tariff application?

Use it to prepare and test the numbers. The formal proposal, consultation and approval process still applies. Check the current rules with the regulator before changing customer rates.

Why does the calculator warn about unbilled units?

If the last block has a limit and consumption goes past it, those units have no rate. That is usually a mistake in the tariff, not free water.

Run the tariff on real connections

BillGrid applies block tariffs, standing charges and levies to every connection in one run, and shows how every bill was worked out.

Or reach us directly

We reply within one business day.